• High Throughput CMOS Sensors and Actuators: An Emerging Technology for Automation of Biological Laboratories

    Room: ENG 288, George Vari Centre for Computing and Engineering

    Friday, February 2nd at 12:15 p.m., Dr. Ebrahim Ghafar-Zadeh (PhD, P.Eng), Director of Biologically Inspired Sensors and Actuators Laboratory, will be presenting “High Throughput CMOS Sensors and Actuators: An Emerging Technology for Automation of Biological Laboratories”. Day & Time: Friday, February 2, 2018 12:15 p.m. ‐ 1:15 p.m. Speaker: Dr. Ebrahim Ghafar-Zadeh Biologically Inspired Sebsors and Actuators ( BioSA) Dept. of Electrical Engineering and Computer Science Lassonde School of Engineering York University Location: Room: ENG 288, George Vari Centre for Computing and Engineering 245 Church Street Toronto, Ontario M5B 2K3 Contact: Maryam Davoudpour Organizer: WIE IEEE Toronto, IEEE Ryerson Student Chapter, Instrumentation-Measurement/Robotics-Automation, Magnetics, and Computer Science Department of Ryerson University Abstract: Recent advances of Complementary Metal Oxide Semiconductor (CMOS) Lab-on-Chip (LoC) technologies have greatly attracted the attentions for a variety of life science applications including DNA sequencing, drug discovery and automation of biological laboratories. A CMOS based LoC consists of a microfluidic device for directing the biological/chemical samples towards sensors (e.g. magnetic, optical or capacitive sensors) or actuators (e.g. magnetic or electrical actuators). An array of sensors or actuators can be realized on the top of CMOS integrated circuits (IC) for accurately measurement of chemical and/or biological signals. High throughput microfluidic/CMOS technology for cellular and molecular analysis is in a very early stage of development and there are several critical challenges that must be investigated and resolved. In this talk, professor Ghafar-Zadeh will discuss new perspectives and challenges for the design and implementation of hybrid microfluidic CMOS sensors and actuators. Also he will demonstrate and discuss his recent research achievements in this emerging field of research. Biography: Ebrahim Ghafar-Zadeh (PhD, P.Eng) received his BSc ( KNT University, Tehran Iran), MSc (University of Tehran, Iran) and PhD ( Ecole Polytechnique de Montreal, Canada) degrees in Electrical Engineering in 1992, 1994 and 2008 respectively. In recognition of his innovative research in the topic of hybrid microfluidic/microelectronic systems, Dr. Ghafar-Zadeh received several postdoctoral fellowship awards including NSERC PDF and FRQNT PDF and he perused two postdoctoral fellows in the Dept. of Electrical and Computer Engineering, McGill University; and the Dept. of Bio-engineering, University of California, Berkeley. Dr. Ghafar-Zadeh has published more than 100 journal and conference papers and a book titled CMOS Capacitive Sensors for Lab-on-Chip applications. Since 2013, he has been an assistant Professor, in the Dept. of Electrical Engineering and Computer Science, York University, Toronto, Canada. Dr. Ghafar-Zadeh is the director of Biologically Inspired Sensors and Actuators Laboratory.

  • Introduction to Python Workshop

    Ryerson University (Victoria Building, Room VIC 301)

    IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE WIE, IEEE Computational Intelligence Chapter, and Robotics/ Automation Chapter are Please to announce the start of their series of python workshops. A series of 6 workshops will give the participants the ability to use the basics of python as well as Machine learning to help them in their study or workplace. At the end of these workshops there will be a certificate given to participants who attended these workshops. Day & Time: Monday, February 5, 2018 6:00 p.m. ‐ 8:00 p.m. Location: Ryerson University (Victoria Building, Room VIC 301) Contact: ieee.ryersonu@gmail.com Organizer: IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE Computational Intelligence Chapter, WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation RVSP: https://www.eventbrite.com/e/ieee-ryerson-intro-to-python-workshop-tickets-42588313793

  • Canada’s Robotics Moment

    Autodesk Technology Centre, 661 University Avenue, Suite 100, MaRS Discovery District

    Join us for an in depth discussion on Canada’s place amidst global trends and opportunities in the robotics market. Canada has a unique opportunity to leverage its international reputation in AI (artificial intelligence) to tap into the fast-growing commercial robotics market. Canada invested early and wisely in AI, culminating in the recent explosion in investment, commercial activity and global recognition. Robotics is the next frontier for innovation and investment. The Canadarm delivered international profile for executing high-stakes feats of robotic ingenuity. That success has been repeated in field after field without similar recognition. It’s time to bring thought leaders and stakeholders together to shape a comprehensive national robotics strategy. Led by Andra Keay, Managing Director, Silicon Valley Robotics, speakers will explore the collaborations, supports and partnerships needed to establish Canada as a global player in the commercial robotics market. A panel from industry, government and academia will discuss Canada’s strengths and how to capitalize on them to build a vibrant robotics industry. Speakers include: Andra Keay, Managing Director, Silicon Valley Robotics Dr. Molly Schoichet, OC, OOnt, Chief Scientist, Ontario Hallie Siegel, Innovation Strategist Dr. Farzad Rayegani, Dean of Applied Technology, Humber College Dr. William Melek, Director of Mechatronics Engineering, University of Waterloo Day & Time: Thursday, February 8, 2018 2:30 p.m. ‐ 5:30 p.m. Location: Autodesk Technology Centre 661 University Avenue, Suite 100, MaRS Discovery District Contact: Maryam Davoudpour Organizer: WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation RVSP: https://www.eventbrite.com/e/canadas-robotics-moment-tickets-42391575343?aff=AIPromo Agenda: 2:30 pm. Welcome, Adriana Ieraci, Founder, GYBO Robotics Network 2:35 pm. A National Robotics Strategy for Canada, Hallie Siegel, Innovation Strategist 2:50 pm. Global Trends and Opportunities, Andra Keay, Managing Director, Silicon Valley Robotics 4:05 pm. Panel Discussion: Making it Happen 5:00 pm. Networking See the event brief for speaker bios and details.

  • Big Data Hackathon

    Ryerson University

    IEEE Ryerson Student Chapter, IEEE Ryerson Computer Chapter and IEEE Woman In Engineering are proud to present our first Big Data Hackathon, in collaboration with the Clean Energy Zone. This hackathon will bring the state of art techniques to energy forecasting, bridge the academic research and industry practice, elevate data analytics in power engineering education, and engage the industry in smart grid energy forecasting challenges. The winner of this hackathon will get an exciting opportunity to work with the Clean Energy Zone to implement their solution in real life.

  • IEEE Ryerson Python Workshop 2

    Ryerson University (Victoria Building, Room VIC 301)

    IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, WIE IEEE Toronto, IEEE Computational Intelligence Chapter, and Robotics/ Automation Chapter are Please to announce the second workshop of their series of python workshops. A series of 6 workshops will give the participants the ability to use the basics of python to help them in their study or workplace. At the end of these workshops there will be a certificate given to participants who attended these workshops. Day & Time: Monday, February 12, 2018 6:00 p.m. ‐ 8:00 p.m. Location: Ryerson University (Victoria Building, Room VIC 301) Contact: ieee.ryersonu@gmail.com Organizer: IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE Computational Intelligence Chapter, WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation Register at: https://www.eventbrite.com/e/ieee-ryerson-python-workshop-2-tickets-42931234478

  • Providing Better Customer Value and Benefits and IT Solutions

    Centennial College – Progress Campus, room A3-17

    Thursday, February 15th at 12:30 p.m., Jeremy Gervais, Software Engineer at Amazon, will be presenting “Providing Better Customer Value and Benefits and IT Solutions”. Day & Time: Thursday, February 15, 2018 – 12:30 p.m. Speaker: Jeremy Gervais Software Engineer, Amazon Location: Centennial College – Progress Campus, room A3-17 Contact: Nicoleta Zouri Organizer: IEEE Toronto Women in Engineering, IEEE Toronto Instrumentation-Measurement/Robotics-Automation Abstract: Amazon is striving to create new services, user work flows and products. Some aspects that contribute to better customer value and benefits are a reduction of payment friction and reducing costs through efficient workflow.

  • Hybrid Biomedical Optics Imaging and Instrumentation

    Room: ENG 210, George Vari Centre for Computing and Engineering, 245 Church Street, Toronto, Ontario M5B 2K3

    Friday, February 16th at 12:15 p.m., Nima Tabatabaei, Assistant Professor in the Department of Mechanical Engineering and Director of Hybrid Biomedical Optics Laboratory at York University, will be presenting “Hybrid Biomedical Optics Imaging and Instrumentation”. Day & Time: Friday, February 16, 2018 12:15 p.m. ‐ 1:15 p.m. Speaker: Nima Tabatabaei Assistant Professor, Department of Mechanical Engineering Director, Hybrid Biomedical Optics Laboratory York University, Canada Location: Room: ENG 210, George Vari Centre for Computing and Engineering 245 Church Street Toronto, Ontario M5B 2K3 Contact: Saba Sedghizade, Maryam Davoudpour Organizer: WIE IEEE Toronto, IEEE Ryerson Student Chapter, Instrumentation-Measurement/Robotics-Automation, Magnetics, and Computer Science Department of Ryerson University Abstract: The focus of professor Tabatabaei’s research is on the design and instrumentation of thermal and optical imaging technologies and devices with applications in medical diagnosis and screening. Optics-based medical devices are of particular interest to him due to their intrinsic ability of revealing malignancies in early stages. The early diagnosis of diseases improves the effectiveness of treatments, promotes prevention rather than medical intervention, and is probably the only approach for us to win the war on cancer. However, one of the major challenges in optical imaging of endogenous tissue contrast is the poor specificity due to background signals from healthy tissues. Professor Tabatabaei’s research vision is to overcome this shortcoming by separating excitation and detection channels using Hybrid methods. In this scenario, crosstalk between the channels, selectively, takes place by energy conversion at malignant sites that are sensitive to the excitation thus minimizing (if not eliminating) the signals originating form background health tissues. Biography: Nima Tabatabaei is an assistant professor in the Department of Mechanical Engineering and the director of Hybrid Biomedical Optics laboratory (http://www.HBOLab.ca) at the York University (Canada). He received his B.Sc. and M.Sc. in Materials Science and Engineering and Ph.D. in Mechanical Engineering (University of Toronto; 2012) before carrying out research at the Harvard Medical School and Wellman Center for Photomedicine as postdoctoral fellow. His research interests are design and development of hybrid biomedical optics imaging technologies for applications in early disease diagnosis and screening.

  • Introduction to Vehicle Safety, Simulation Tools for Autonomous Transportation and human-machine interface (HMI)

    University of Ontario Institute of Technology, 2000 Simcoe St N, Oshawa, ON L1H 7K4, Canada

    Monday, February 26th at 11:00 a.m., come to the University of Ontario Institute of Technology (UOIT) to learn about vehicle safety and relevant restraint systems and more at the “Introduction to Vehicle Safety, Simulation Tools for Autonomous Transportation and human-machine interface (HMI)” seminar. Day & Time: Monday, February 26, 2018 11:00 a.m. ‐ 12:30 p.m.: UB2080 12:30 p.m. ‐ 3:00 p.m.: SIRC 2020A Speakers: Dr. Stefan Dominico Professor, Engineering mechanics and simulations, Frankfurt University of Applied Sciences, Frankfurt, Germany Mr. Mohsen Tayefeh, M. Eng. Regional Sales Manager, SimuTech Group Mr. Roman Duplak P.Eng., M.Eng. Business Development Manager, SimuTech Group Dr. Moustafa El-Gindy, PEng Associate Professor, Department of Mechanical Automotive and Manufacturing Engineering, University of Ontario Institute of Technology Mr. Walter Hearn Area Director, ANSYS, Inc. Location: University of Ontario Institute of Technology (UOIT) 2000 Simcoe St N Oshawa, ON L1H 7K4 Contact: Dr. Ahmad Barari, PEng Register: http://go.simutechgroup.com/autonomous-systems-uoit Organizer: IEEE Toronto Women in Engineering, IEEE Toronto Instrumentation-Measurement/Robotics-Automation, IEEE Toronto Magnetics Abstract: Reducing the number of people killed in road accidents is an important and challenging task. Beside other aspects improving the vehicle safety helps to achieve this goal. A lot of effort is being made by car manufacturers all over the world to improve the so-called safety performance of newly developed vehicles. This workshop will give a short introduction to vehicle safety and relevant restraint systems with a focus on the deployment of the restraint systems (“airbag sensing”) used to improve the protection of people (e.g. vehicle occupants) involved in a vehicle accident. Also, special focus will be on broad capabilities for simulating autonomous vehicles and advanced driver assistance systems — everything from high-fidelity, physics-based sensor modeling to ISO26262 and AUTOSAR compliant embedded software and human-machine interface development tools. The following topics will be covered: Introduction to Vehicle Safety Engineering Simulation for Safety – Driving scenarios – Virtual road test autonomous vehicles Restraint Systems and Airbag Sensing – Restraint Systems – Introduction to Airbag Sensing – Airbag Sensing (Calibration) Development – The future of Airbag Sensing – Lessons Learned (for real live) Vehicle Dynamics and Crash Simulation Research Future Trends – The race to develop autonomous vehicles (AV) – Advanced driver assistance systems (ADAS) – Autonomous driving technology — involving radar, lidar, V2X communication, sensor fusion and deep learning – Safe automated driving Biography: Dr. Stefan Dominico Dr. Dominico has extensive working experience in German auto-industries including vehicle safety development for Adam Opel AG, and simulation at an engineering supplier (IHF – Ingenieurbüro Huß & Feickert), and several years research experience on nonlinear finite element simulations at the Universität Kassel. Mr. Mohsen Tayefeh, M. Eng. Mr. Tayefeh has been consultant to various industries in implementation of advanced technologies through partnership strategies for many years. He is an expert in computer aided engineering, finite element analysis and simulation. He also has extensive experience to design and manufacturing in automotive sector. Mr. Roman Duplak P.Eng., M.Eng. As a trusted advisor Roman helps companies to implement high technologies. Prior to this he worked as a Business Segment Director for the largest Bus Manufacturer in North America (i.e. New Flyer Industries) and as a Program Manager for Boeing. Moreover, his technical background consisted of working as a Chief Engineer in electromechanical actuation technologies, which brings lots of added value to this seminar. Dr. Moustafa El-Gindy, PEng Dr. El-Gindy is a leading researcher on vehicle safety and crash worthiness analysis. His research interests includes articulated heavy vehicles, bus testing and simulation, crash testing and simulations, high-velocity impact and ballistics simulation, self-steering axles simulation, Tire mechanics, and virtual human modelling. Mr. Walter Hearn Mr. Hearn has been in leadership roles with ANSYS for more than 10 years. Currently he is directing multiple direct and indirect teams across the Central U.S. and Canada. His successful strategies in supervising partnerships with companies will bring significant added value and we will learn many practical success stories from him during this seminar.

  • Visit Hamilton’s Innovative Technology Companies and Researchers

    175 Longwood Rd S, Hamilton ON L8P 0A1

    Update: This event has been postponed, the new date and time will be determined at a future date. Students are invited to join a tour of McMaster Innovation Park, where innovators will be giving talks and workshops displaying their products, services and research. Day & Time: Postponed, New Day & Time TBD Location: 175 Longwood Rd S, Hamilton ON L8P 0A1 Contact & Register: To register, email Zac at zachariahabrahams@mohawkcollege.ca Organizer: IEEE Toronto Women in Engineering, IEEE Toronto Instrumentation-Measurement/Robotics-Automation

  • IEEE Ryerson Python Workshop 3

    Ryerson University (Victoria Building, Room VIC 301)

    IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, WIE IEEE Toronto, IEEE Computational Intelligence Chapter, and Robotics/ Automation Chapter are Please to announce the third workshop of their series of python workshops. A series of 6 workshops will give the participants the ability to use the basics of python to help them in their study or workplace. At the end of these workshops there will be a certificate given to participants who attended these workshops. Day & Time: Monday, March 5, 2018 6:00 p.m. ‐ 8:00 p.m. Location: Ryerson University (Victoria Building, Room VIC 301) Contact: ieee.ryersonu@gmail.com Organizer: IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE Computational Intelligence Chapter, WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation Register at: https://www.eventbrite.com/e/ieee-ryerson-python-workshop-3-tickets-43189931247

  • Symposium on Smart Cities and Transportation

    Room 2106, Sidney Smith Hall, 100 St George St, Toronto, ON M5S 3G3

    Wednesday, March 7th at 6:00 p.m., join us to hear from expert speakers providing us with an introduction to smart cities and a great overview on the plans and current projects that the city of Toronto is implementing in order to make our community more efficient and one of the top technological cities in North America. Day & Time: Wednesday, March 7, 2018 6:00 p.m. – 8:30 p.m. Speakers: Lucia Casacia – Presentation Slides Vice President, Cities and Infrastructure Projects, Siemens Canada Dr. Tom Murad Country Lead – Engineering, Technology & Academic Relations, Siemens Canada Gregg Loane – Presentation Slides Manager, ITS Capital Delivery for the City of Toronto Fahad Khan – Presentation Slides Project Lead, City of Toronto Natasha Apollonova – Presentation Slides Associate Vice President, Policy, Toronto Board of Trade Location: Room 2106, Sidney Smith Hall, University of Toronto 100 St George St, Toronto, ON M5S 3G3 Contact: Omid Alizadeh Register: https://events.vtools.ieee.org/m/168324 Organizer: This seminar is organized by IEEE Toronto’s Industry Relations Committee and the Power & Energy Chapter, in collaboration with Siemens Canada IEEE Committee and Ontario Society of Professional Engineers (OSPE), and IEEE University of Toronto Student Branch. Light refreshments will be provided. Abstract & Agenda: Intelligent infrastructure paves the way for smarter, more integrated systems that keep economies running and contribute to economic success, efficiency savings, and economics of scales. Buildings not only offer space for working and living, they are also capital investments. Their value can be maintained only if they are operated cost-effectively. A constant reliable energy supply is central for economic growth and stability, as well as social wellbeing. However today’s grids were not designed to handle the growing power requirements or the increasing proportion of fluctuating power generated from renewable sources. Transportation of people and goods is a top priority for metropolitan areas. Population growth, congestion and the growing demand for mobility all place increasing burdens on transport systems with negative impacts for businesses, residents and overall quality of life. A Smart City applies state-of-the-art solutions enabled and improved by holistic Integration for the sake of the people, of the administration, of the business as well as of the environment. 6:00 pm-6:30 pm: Opening 6:30 pm-7:00 pm: Introduction to Smart Cities by Lucia Casacia, Vice President, Cities and Infrastructure Projects, Siemens Canada & Dr. Tom Murad, Country Lead – Engineering, Technology & Academic Relations, Siemens Canada 7:00 pm-7:20 pm: Transportation Initiatives and Vision of the City of Toronto by Gregg Loanne, Manager of ITS, City of Toronto 7:20 pm-7:40 pm: Preparing for Automated Vehicles at the City of Toronto by Fahad Khan, Project Lead, City of Toronto 7:40 pm-8:00 pm: Focusing on Smart to Move Toronto from Good to Great by Natasha Apollonova, Associate Vice President, Policy, Toronto Board of Trade 8:00 pm-8:10 pm: Open Panel Discussion on Job Opportunities in Technology Infrastructure and Smart Cities 8:10 pm-8:20 pm: Q&A 8:20 pm-8:30 pm: Closing Biography: Lucia Casacia As the Vice President, Cities and Infrastructure Projects, Lucia leads Siemens Canada’s strategic focus on cities account management in order to leverage federal, provincial and municipal government infrastructure investment in cities across Canada. Lucia brings to Siemens extensive experience in the areas of engineering, construction management and commissioning of capital expansion projects. She is a valued member of Siemens Canada’s leadership team, most recently as the head of the Low Voltage & Products business unit in the Energy Management division. Lucia is a graduate of McMaster University and has a Masters Certi_cate in Strategic Leadership from the Schulich School of Business in Toronto. Other areas of certi_cation include Operational Excellence and Lean Manufacturing (5S). Dr. Tom Murad Tom is a respected leader, thinker, and distinguished speaker on the topics of Engineering, Technology and Technical talents development and education and a member of PEO Engineering Order of Honour. Tom joined Siemens Canada in 2010, he is the founder of the Siemens Canada Engineering and Technology Academy “SCETA”, that he established and directed since October 2014. He is also serving as a member of various advisory Boards of Directors in the Industry and Academia. Tom has about 40 years of Professional Engineering and Technical Operations Executive Management including Academic and R&D work in Electrical power, Industrial Controls and Automation. Dr. Murad holds a Bachelor of Engineering (Electrical & Electronics), and a Doctorate (Ph.D.) in Power Electronics and Industrial Controls from Loughborough University of Technology in the UK, with a Leadership Program Certificate from Schulich Business School, York University in Ontario, Canada. Dr. Murad is a Fellow of Engineers Canada, a licensed (P.Eng.) member of The Professional Engineering Ontario (PEO); APEGA in Alberta, and NAPEG in the North Western Territories. He is a Senior Member of IEEE, and is member of Board of Directors – IEEE Canada, past chair of Executive Committee – IEEE Toronto Section, member of Board of Directors – Canadian-German Centre for Innovation and Research, member of the PEO Licensing “Engineering Experience Review” – ERC Committee since 2002, member of OSPE’s Hamilton – Halton Engineering week Committee, and he is serving on various Advisory Boards in the Industry and the Academia. Gregg Loane Gregg is currently the Manager – ITS Capital Delivery for the City of Toronto. He has over 25 years of ITS experience, split evenly between the public and private sectors, with a focus on connecting client / user needs with appropriate transportation technology solutions, as well as education in the field of ITS. His current responsibilities include deploying ITS for a variety of municipal applications (e.g. signal control, incident management, traveller information, etc.), and for providing technical representation on Toronto’s Autonomous Vehicle Preparation and Unattended Aerial Vehicle Working Groups. In the private sector, he led large-scale ATIS deployments (e.g. the Los Angeles and Florida 511 systems). These experiences built his strengths in project management, project finance, and personnel management, and have provided insight into a wide range of ITS-related user needs. Fahad Khan Fahad is the Project Lead for Automated and Autonomous Vehicles with the City of Toronto. He is the first person in North America to be hired by a leading municipality tasked with the sole purpose of investigating and preparing for automated vehicles. Being a deep car lover and a person known for pushing boundaries, Fahad has worked hard to push Toronto’s transportation system to new levels of innovation and technology. Natasha Apollonova Natasha is the Assistant Vice President, Policy with Toronto Region Board of Trade (the Board). The Board is the chamber of commerce for Canada’s largest urban centre representing 12,000 Members and connecting more than 250,000 business professionals and influencers throughout the Toronto region. The Board is an influential thought leader on key business and public policy issues impacting the Toronto region’s globally competitive economy. Over the past eight years, Natasha has been actively engaged in the Board’s municipal and provincial campaigns. She has also been instrumental in raising the profile of Toronto as an international city region by leading the Board’s benchmarking analysis and liaising with key stakeholders including all three levels of government and business leaders. Natasha currently leads the Board’s Smart Cities Initiative and the Movement of Goods files. Natasha holds a Master degree in Business Economics from Wilfrid Laurier University, an Honours degree in Economics from the University of Western Ontario and is fluent in Russian. She is on the Board of Directors for Toronto Association for Business Economics (TABE) and mentors several young women professionals through Women in Capital Markets and TABE.

  • IEEE Ryerson Python Workshop 4

    Ryerson University (Victoria Building, Room VIC 301)

    IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, WIE IEEE Toronto, IEEE Computational Intelligence Chapter, and Robotics/ Automation Chapter are Please to announce the fourth workshop of their series of python workshops. A series of 6 workshops will give the participants the ability to use the basics of python to help them in their study or workplace. At the end of these workshops there will be a certificate given to participants who attended these workshops. Day & Time: Monday, March 12, 2018 6:00 p.m. ‐ 8:00 p.m. Location: Ryerson University (Victoria Building, Room VIC 301) Contact: ieee.ryersonu@gmail.com Organizer: IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE Computational Intelligence Chapter, WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation