• Hybrid Biomedical Optics Imaging and Instrumentation

    Room: ENG 210, George Vari Centre for Computing and Engineering, 245 Church Street, Toronto, Ontario M5B 2K3

    Friday, February 16th at 12:15 p.m., Nima Tabatabaei, Assistant Professor in the Department of Mechanical Engineering and Director of Hybrid Biomedical Optics Laboratory at York University, will be presenting “Hybrid Biomedical Optics Imaging and Instrumentation”. Day & Time: Friday, February 16, 2018 12:15 p.m. ‐ 1:15 p.m. Speaker: Nima Tabatabaei Assistant Professor, Department of Mechanical Engineering Director, Hybrid Biomedical Optics Laboratory York University, Canada Location: Room: ENG 210, George Vari Centre for Computing and Engineering 245 Church Street Toronto, Ontario M5B 2K3 Contact: Saba Sedghizade, Maryam Davoudpour Organizer: WIE IEEE Toronto, IEEE Ryerson Student Chapter, Instrumentation-Measurement/Robotics-Automation, Magnetics, and Computer Science Department of Ryerson University Abstract: The focus of professor Tabatabaei’s research is on the design and instrumentation of thermal and optical imaging technologies and devices with applications in medical diagnosis and screening. Optics-based medical devices are of particular interest to him due to their intrinsic ability of revealing malignancies in early stages. The early diagnosis of diseases improves the effectiveness of treatments, promotes prevention rather than medical intervention, and is probably the only approach for us to win the war on cancer. However, one of the major challenges in optical imaging of endogenous tissue contrast is the poor specificity due to background signals from healthy tissues. Professor Tabatabaei’s research vision is to overcome this shortcoming by separating excitation and detection channels using Hybrid methods. In this scenario, crosstalk between the channels, selectively, takes place by energy conversion at malignant sites that are sensitive to the excitation thus minimizing (if not eliminating) the signals originating form background health tissues. Biography: Nima Tabatabaei is an assistant professor in the Department of Mechanical Engineering and the director of Hybrid Biomedical Optics laboratory (http://www.HBOLab.ca) at the York University (Canada). He received his B.Sc. and M.Sc. in Materials Science and Engineering and Ph.D. in Mechanical Engineering (University of Toronto; 2012) before carrying out research at the Harvard Medical School and Wellman Center for Photomedicine as postdoctoral fellow. His research interests are design and development of hybrid biomedical optics imaging technologies for applications in early disease diagnosis and screening.

  • Introduction to Vehicle Safety, Simulation Tools for Autonomous Transportation and human-machine interface (HMI)

    University of Ontario Institute of Technology, 2000 Simcoe St N, Oshawa, ON L1H 7K4, Canada

    Monday, February 26th at 11:00 a.m., come to the University of Ontario Institute of Technology (UOIT) to learn about vehicle safety and relevant restraint systems and more at the “Introduction to Vehicle Safety, Simulation Tools for Autonomous Transportation and human-machine interface (HMI)” seminar. Day & Time: Monday, February 26, 2018 11:00 a.m. ‐ 12:30 p.m.: UB2080 12:30 p.m. ‐ 3:00 p.m.: SIRC 2020A Speakers: Dr. Stefan Dominico Professor, Engineering mechanics and simulations, Frankfurt University of Applied Sciences, Frankfurt, Germany Mr. Mohsen Tayefeh, M. Eng. Regional Sales Manager, SimuTech Group Mr. Roman Duplak P.Eng., M.Eng. Business Development Manager, SimuTech Group Dr. Moustafa El-Gindy, PEng Associate Professor, Department of Mechanical Automotive and Manufacturing Engineering, University of Ontario Institute of Technology Mr. Walter Hearn Area Director, ANSYS, Inc. Location: University of Ontario Institute of Technology (UOIT) 2000 Simcoe St N Oshawa, ON L1H 7K4 Contact: Dr. Ahmad Barari, PEng Register: http://go.simutechgroup.com/autonomous-systems-uoit Organizer: IEEE Toronto Women in Engineering, IEEE Toronto Instrumentation-Measurement/Robotics-Automation, IEEE Toronto Magnetics Abstract: Reducing the number of people killed in road accidents is an important and challenging task. Beside other aspects improving the vehicle safety helps to achieve this goal. A lot of effort is being made by car manufacturers all over the world to improve the so-called safety performance of newly developed vehicles. This workshop will give a short introduction to vehicle safety and relevant restraint systems with a focus on the deployment of the restraint systems (“airbag sensing”) used to improve the protection of people (e.g. vehicle occupants) involved in a vehicle accident. Also, special focus will be on broad capabilities for simulating autonomous vehicles and advanced driver assistance systems — everything from high-fidelity, physics-based sensor modeling to ISO26262 and AUTOSAR compliant embedded software and human-machine interface development tools. The following topics will be covered: Introduction to Vehicle Safety Engineering Simulation for Safety – Driving scenarios – Virtual road test autonomous vehicles Restraint Systems and Airbag Sensing – Restraint Systems – Introduction to Airbag Sensing – Airbag Sensing (Calibration) Development – The future of Airbag Sensing – Lessons Learned (for real live) Vehicle Dynamics and Crash Simulation Research Future Trends – The race to develop autonomous vehicles (AV) – Advanced driver assistance systems (ADAS) – Autonomous driving technology — involving radar, lidar, V2X communication, sensor fusion and deep learning – Safe automated driving Biography: Dr. Stefan Dominico Dr. Dominico has extensive working experience in German auto-industries including vehicle safety development for Adam Opel AG, and simulation at an engineering supplier (IHF – Ingenieurbüro Huß & Feickert), and several years research experience on nonlinear finite element simulations at the Universität Kassel. Mr. Mohsen Tayefeh, M. Eng. Mr. Tayefeh has been consultant to various industries in implementation of advanced technologies through partnership strategies for many years. He is an expert in computer aided engineering, finite element analysis and simulation. He also has extensive experience to design and manufacturing in automotive sector. Mr. Roman Duplak P.Eng., M.Eng. As a trusted advisor Roman helps companies to implement high technologies. Prior to this he worked as a Business Segment Director for the largest Bus Manufacturer in North America (i.e. New Flyer Industries) and as a Program Manager for Boeing. Moreover, his technical background consisted of working as a Chief Engineer in electromechanical actuation technologies, which brings lots of added value to this seminar. Dr. Moustafa El-Gindy, PEng Dr. El-Gindy is a leading researcher on vehicle safety and crash worthiness analysis. His research interests includes articulated heavy vehicles, bus testing and simulation, crash testing and simulations, high-velocity impact and ballistics simulation, self-steering axles simulation, Tire mechanics, and virtual human modelling. Mr. Walter Hearn Mr. Hearn has been in leadership roles with ANSYS for more than 10 years. Currently he is directing multiple direct and indirect teams across the Central U.S. and Canada. His successful strategies in supervising partnerships with companies will bring significant added value and we will learn many practical success stories from him during this seminar.

  • Visit Hamilton’s Innovative Technology Companies and Researchers

    175 Longwood Rd S, Hamilton ON L8P 0A1

    Update: This event has been postponed, the new date and time will be determined at a future date. Students are invited to join a tour of McMaster Innovation Park, where innovators will be giving talks and workshops displaying their products, services and research. Day & Time: Postponed, New Day & Time TBD Location: 175 Longwood Rd S, Hamilton ON L8P 0A1 Contact & Register: To register, email Zac at zachariahabrahams@mohawkcollege.ca Organizer: IEEE Toronto Women in Engineering, IEEE Toronto Instrumentation-Measurement/Robotics-Automation

  • IEEE Ryerson Python Workshop 3

    Ryerson University (Victoria Building, Room VIC 301)

    IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, WIE IEEE Toronto, IEEE Computational Intelligence Chapter, and Robotics/ Automation Chapter are Please to announce the third workshop of their series of python workshops. A series of 6 workshops will give the participants the ability to use the basics of python to help them in their study or workplace. At the end of these workshops there will be a certificate given to participants who attended these workshops. Day & Time: Monday, March 5, 2018 6:00 p.m. ‐ 8:00 p.m. Location: Ryerson University (Victoria Building, Room VIC 301) Contact: ieee.ryersonu@gmail.com Organizer: IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE Computational Intelligence Chapter, WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation Register at: https://www.eventbrite.com/e/ieee-ryerson-python-workshop-3-tickets-43189931247

  • IEEE Ryerson Python Workshop 4

    Ryerson University (Victoria Building, Room VIC 301)

    IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, WIE IEEE Toronto, IEEE Computational Intelligence Chapter, and Robotics/ Automation Chapter are Please to announce the fourth workshop of their series of python workshops. A series of 6 workshops will give the participants the ability to use the basics of python to help them in their study or workplace. At the end of these workshops there will be a certificate given to participants who attended these workshops. Day & Time: Monday, March 12, 2018 6:00 p.m. ‐ 8:00 p.m. Location: Ryerson University (Victoria Building, Room VIC 301) Contact: ieee.ryersonu@gmail.com Organizer: IEEE Ryerson Student Branch, IEEE Ryerson Computer Chapter, IEEE Computational Intelligence Chapter, WIE IEEE Toronto, Instrumentation-Measurement/Robotics-Automation

  • Privacy in Health Overview and Privacy by Design Concept

    Room A3-13, Centennial College, Progress Campus 941 Progress Ave., Toronto, Ontario, M1G 3T8

    Tuesday, March 20th at 12:30 p.m., Patrick Lu, CEO at Privacy Horizon, will be presenting “Privacy in Health Overview and Privacy by Design Concept”. Day & Time: Tuesday, March 20, 2018 12:30 p.m. Speaker: Patrick Lu, CEO Privacy Horizon Location: Room A3-13 Centennial College, Progress Campus 941 Progress Ave., Toronto, Ontario, M1G 3T8 Contact: Dr. Maryam Davoudpour Organizer: IEEE Toronto WIE, Instrumentation/ Measurement – Robotics Automation Chapters Abstract: A privacy management program ensures that an organization has the necessary infrastructure in place to protect personal information from loss or theft, or from unauthorized access, modification, copying, collection, use, disclosure or retention. This presentation will discuss the essential elements of a privacy management program.

  • Cybersecurity Challenges in Today’s Big Data Obsessed Environment

    Room A3-13, Centennial College, Progress Campus 941 Progress Ave., Toronto, Ontario, M1G 3T8

    Thursday, March 22nd at 12:30 p.m., Sean Duchstein, Cyber Security Professional, will be presenting “Cybersecurity Challenges in Today’s Big Data Obsessed Environment”. Day & Time: Thursday, March 22, 2018 12:30 p.m. Speaker: Sean Duchstein, Cyber Security Professional Paladion Location: Room A3-13 Centennial College, Progress Campus 941 Progress Ave., Toronto, Ontario, M1G 3T8 Contact: Dr. Maryam Davoudpour Organizer: IEEE Toronto WIE, Instrumentation/ Measurement – Robotics Automation Chapters Abstract: Ability to timely detect security breaches and respond adequately is essential for business continuity. Paladion cyber defense strategies and mechanisms help companies staying ahead of cyber attacks.

  • IEEE Ryerson – IOT Smart City Hackathon

    George Vari Engineering and Computing Centre, 245 Church St, Toronto, ON M5B 1Z4, Canada

    IEEE Ryerson presents IOT for Smart Cities Hackathon. It is a 24 hour hackathon happening on March 24th. Attendees can join as a team of 3 or we can place you in a team. It’s an open Hackathon, so anyone from any department and any institution can attend; doesn’t matter about your skill level and experience. Teams will present their final projects in front of a panel of judges for a chance to win prize money and an exciting opportunity to network with variety of industry personnel. Materials will be provided on the day of the hackathon. 1st Place: $750 2nd Place: $500 3rd Place: $250 Day & Time: 9:00 a.m. Saturday, March 24, 2018 – 1:00 p.m. Sunday, March 25, 2018 Location: George Vari Engineering and Computing Centre 245 Church St., Toronto, Ontario Contact: Dr. Maryam Davoudpour Organizer: IEEE Ryerson, IEEE Toronto WIE, IEEE Toronto Instrumentation & Measurement – Robotics & Automation Hardware, such as Micrcontrollers, a variety of sensors, and other peripherals etc. will be provided and you are free to use to the web as a resource! Prizes will be awarded for the first 3 teams, and professional from IBM, City of Brampton will be present! Apply at: https://www.iotsmartcityhack.tech by Sunday, March 18th! Acceptance applicant will be required to pay $10 fee.

  • Women in Robotics: Early Careers in Robotics, Hardware and AI

    100 College St, Toronto, ON M5G 1L5, Canada

    Wednesday, April 4th at 6:00 p.m., come and hear from a group of young engineers as they share their experiences finding jobs, where they see opportunities, and what they wish they knew when they first started out – “Women in Robotics: Early Careers in Robotics, Hardware and AI”. Day & Time: Wednesday, April 4, 2018 6:00 p.m. ‐ 9:00 p.m. Speakers: Fiona Chui, UAS Intelligence Developer, SkyX Systems Corp Geneviève Foley, Senior Research Engineer, Medical Robotics, Kinova Kirusha Srimohanarajah, Technology Transfer Developer, Synaptive Medical Location: OnRamp, Suite 150 100 College Street, Toronto ON M5G 1L5 RVSP: https://www.meetup.com/GYBORobotics/events/249241506 Organizer: IEEE Toronto Women in Engineering, Instrumentation & Measurement – Robotics & Automation Chapter Abstract: In celebration of National Engineering Month, March 2018 and International Women’s Day, March 8, 2018, come and hear from a group of young engineers as they share their experiences finding jobs, where they see opportunities, and what they wish they knew when they first started out. The speakers will also share some of their work. This event is produced by the GYBO Robotics Network in partnership with the Society of Women Engineers Toronto and the IEEE Women in Engineering Toronto Chapter.

  • Data Security and Privacy in Healthcare

    Room A3-13, Centennial College, Progress Campus 941 Progress Ave., Toronto, Ontario, M1G 3T8

    Monday, April 9th at 12:30 p.m., Dave Rajnauth, will be presenting “Data Security and Privacy in Healthcare”. Day & Time: Monday, April 9, 2018 12:30 p.m. Speaker: Dave Rajnauth GRA Consultants Location: Room A3-13 Centennial College, Progress Campus 941 Progress Ave., Toronto, Ontario, M1G 3T8 Contact: Dr. Maryam Davoudpour Organizer: IEEE Toronto WIE, Instrumentation/ Measurement – Robotics Automation Chapters Abstract: Complex challenges of data security and privacy in healthcare requires innovative and cost effective solutions for healthcare organizations. A good understanding of these challenges and the complex task of protecting data privacy is essential in preventing data breaches. This presentation is an overview of the cybersecurity challenges face by health care organizations.

  • Introduction To Robotics and Automation

    Welcome to IEEE Introduction to Robotics and Automation. This course develops students' skills and self-confidence in common automation practices. The student will learn the parts of a robot, how they work together and the theory and code used to control them. Date & Time: Monday May 28th, 2018 2:30 p.m. Location: Humber North Campus, J Building Organizers: IEEE Toronto WIE, IEEE Toronto Robotics Chapter, IEEE Humber Student Affinity Group For information, please contact: maryam.davoudpour@ieee.org

  • Introduction To Robotics Class 2: Practical Introduction to Robot Subsystems

    Humber College North Campus, J Building

    Students will learn the basic robot building blocks through hands on examples. By the end of the lesson students will precisely control a motor through Arduino code. The flow of information and signals will be examined. Students should read online tutorials on: 1. How to control a servo motor via Arduino 2. How a rotary encoder sensor works and how to use them via Arduino. Date & Time: Monday June 4th, 2018 3:30 p.m. Location: Humber North Campus, J Building Organizers: IEEE Toronto WIE, IEEE Toronto Robotics Chapter, IEEE Humber Student Affinity Group For information, please contact: Dr Maryam Davoudpour